Spokane Locksmith Car Keys

At some point many of you that were sitting inside your cars has set the car keys down. Sometimes this situation end up leading to leaving the vehicle, forgetting to pick the car keys up until the car door is locked and it was much too late. Fortunately, calling a locksmith in Spokane WA will secure that you are able to get inside of your car in no time at all.

A  Spokane locksmith will be able to open your locked car without causing any damage or scratches to your automobile. They should be able to perform this job for you within a short time frame by employing one of a few different tactics. On the other hand, perhaps you have completely lost your keys and you have looked everywhere, but to no avail. If the car keys cannot be located, a locksmith can produce and program another working car key for your vehicle.
 

Another reason an automotive locksmith in Spokane may make you another key is if your car key is no longer opening your doors and starting your ignition. This can be as a result from a key that has been in use for a long period of time. The material of the key will become worn down and not work as accurately as it had before. In fact, the key can possibly break into two pieces after becoming so worn out.
   
There are ways to save time now for future key dilemmas. Make sure that you are in the possession of a spare key to your vehicle. Plan for your future and call an automotive locksmith today to ensure that when you lock yourself out of your car, you can get easily back inside with that spare key.

 

Automotive Ignition Services

Here at Premier NW Locksmith Spokane we offer a wide range of automotive locksmith services which includes ignition switches malfunctions as well. Understanding an ignition issue is important as many make and model vehicles will share similar causes for the malfunction. We noticed that Chrysler models for example, had the same issues occur when it came to the ignition switches of the vehicle. We were able to identify couple of repeating issues.

When there is an issue with an ignition switch, you may be able to still insert the key inside the ignition switch, but in some cases, it won't turn the ignition which in return will not start the vehicle. Most of the time, the user would think the key is at fault where in reality it will be the ignition switch.

Similar to a traditional residential door lock, an ignition switch will have small wafers inside it to accommodate a specific key that will match it. Normal wear and tear or damage are things that can cause the wafers to move out from their place which can cause the issue of operating the ignition switch. The key may not fit all the way inside the cylinder and the user will not be able to start the vehicle. Some of the time, this particular issue can be resolved without replacing the actual ignition switch by adjusting the wafers inside it.

As a mobile locksmith company, repairing or replacing an ignition is not the only automotive service we can offer, we also able to originate keys for most make and model vehicles in the market including Chrysler. Regular or transponder keys, our professional technicians will be able to make a key on location including programming it.

Frozen Locks

Spokane weather during these months of the year are not easy to deal with. Snow and ice are conditions that are no strangers to the area along with other things that may be affected by these conditions. One of the things are frozen automotive locks. Not once people that are about to leave  for work in the morning this time of the year and will be unable to unlock the door of the vehicle because the locks got frozen. However, there are several solutions that would help you deal with these types of situations.

The most common solution for a frozen lock is heat. One way to solve this type situation is to deep your key in boiling water or put it somewhere it can heat up quickly. If using boiling water, before attempting to unlock the frozen lock if using boiling water, the key should be wiped clean first. Using a lighter to heat up the key is another way that can be used.

Deicers are another good solution. they can be found almost at any store. Keeping a few cans handy would be recommended since you never know when you are going to need them and in addition they can be used for other applications as well that may have freezing issues. In order to use it on a frozen lock, a straw must be used in order to insert it inside the keyhole. After everything is setup, spray a little from the deicer and wait a couple of minutes for the material to work. Once you insert the key and jiggle, it should free the lock from the ice.

A material most people don't know that can do the trick in overcoming frozen locks is Vaseline. The chemical compound that is often found inside of a Vaseline can easily melt ice. You can dip the key in Vaseline and immediately insert it inside the lock. Before attempting to turn it, you should jiggle it first and do not use any force as the key might break inside the lock. Once you feel the ice was melted, you may attempt to give it a turn to unlock the door.

For information about automotive locking services, contact Premier NorthWest Locksmith Spokane (509) 557-7680.

Interchangeable Core Locks

See full list on Listly

Broken Key Extraction

Coming home from work only to be denied access to your home because the key broke inside the lock can be frustrating. In these types of situations, calling a locksmith is highly recommended as further damage to the lock may occur and most likely would need the attention of a professional. However there are some things that can be attempted to resolve the situation before deciding to call a professional.

In case the key broke inside the lock, but part of it is sticking out, you are in luck! There is a good chance you will be able to pull the broken piece out by yourself using your fingernail tips or a pair of needle nose pliers. However, if the components of the cylinder are worn and you had to force the key inside which probably caused the breakage in the first place, calling a professional might be your best bet.

Broken key situations is something that can be prevented a lot of the times with few simple basic maintenance measures. Lubrication of the locks would be the first step. Not only it may prevent from the key to break inside the lock in the future, it will prolong the life of the lock as well. Just like any other mechanical mechanism, if a lock does not get the proper maintenance, it may affect the internal components inside the cylinder which will cause it to malfunction in the future. Spraying a silicone lubricant every few months should be enough.

Often overlooked, but also can be a cause of a broken key situation is the key itself. Keys are often subject to a lot of abuse and can wear out at some point as well. When the keys get worn or damage, trying to operating the lock with such keys may result in them breaking inside the lock. For that reason, it is always recommended to keep a fresh spare handy at all times.

For more information about broken key extraction services, contact Premier NorthWest Locksmith Spokane (509) 557-7680.

Ignition Switch Service

See full list on Listly

Deadbolt Types

A deadbolt is a common form of security measure taken by many residential property owners. Although it is not completely "bullet-proof" against burglars, it cannot be beaten easily. If you are inquiring regarding adding or upgrading the existing deadbolt currently installed on the front or back door of your home, know that there are several types and styles available in the market.

The most common type of deadbolt you will find is a single cylinder deadbolt. They are very standard and require a key to lock or unlock the door from the exterior side while from the interior you will have a thumb-turn to control the locking status. Those types of deadbolts can be found mostly on residential applications in which there are no windows or glass near the front door as it may cause a security hazard otherwise.

The next level up in security is a double cylinder deadbolt. With this type of deadbolt, a key is require to control the locking status of the lock from both sides of the door. Those deadbolts will mostly benefit applications where there are nearby glass windows close to the door or glass inserts that are part of it. In such case, an intruder will not be able to break the glass and reach in to unlock the deadbolt from the inside. The only cons from using such deadbolt is the safety hazard it creates during an emergency where fast access out will be needed.

Last but not least is a key-less entry type of deadbolt. With this type of deadbolt, a key is not required at all, but is optional in most cases. Accessibility is gained by entering a code via the keypad or touch-pad interface. The ease of access is one of the biggest advantage this type of deadbolt provides with a minor trade-off which is the price.

For more info on installation and other deadbolt services, contact Premier NorthWest Locksmith Spokane (509) 557-7680.

Mortise Lock For Office

See full list on Listly

Residential Property Lock Systems

When it comes to residential or small commercial properties, there are a wide range of lock systems that are being used depending on the settings and security needs. Houses, apartments, student housings, offices and others all use similar types of lock systems but on different security scales and different mechanisms.

Privacy lock-sets will be common for interior use. This means that most likely no key would be necessary in order to lock or unlock the door. However, there will be a thumb-turn on the interior side of the door which will give the user control on the locking status. These types of lock-sets can be found on restrooms and bedrooms mostly. These lock-sets will come in a form of lever or door knob for easy access.

Moving on to a more secure lock system is whats called an entry lock-set. These can be found on the front door of homes, apartments and even some small offices. They are widely used and very common in a double door knob form in which key is required from the exterior side and sometimes from the interior side as well. Few options are presented depending on the security needs of the user such as the ability to use a thumb-turn from the inside while a key is used on the outside, a key to be used from both sides, or even a knob that will control both the exterior and interior locking mechanism at the same time.

handle-sets are normally the more stylish and efficient security lock system available for residential settings. It will normally combine a doorknob along with a deadbolt which will come in one large unit. The user will have the option to choose between a single or a a double cylinder deadbolt to be part of the set. The handle-sets can be found in a variety of designs and styles that may add to the appearance of the front door of your home.

For more information about interior and exterior lock-sets, contact Premier NorthWest Locksmith Spokane (509) 557-7680.

Smartkey By Kwikset

See full list on Listly

Decorative Locks

Summer time is a time for home improvement. Many people nowadays are looking for ways to enhance the look of their home. Whether if it is from the inside or outside, every small detail counts. Although many people tend to overlook the potential a door knob or lock-set may have in increasing the appearance appeal of their home, The results of updating to a decorative design lock can be surprising.

Unlike what many home owners are thinking, a lock set can achieve a big impression even when overlooked at the beginning. In fact, lock sets and door knob create the best effect when the are not noticeable. When a decorative lock set enhance the appearance of the front door of a home, it tends to blend in with the rest of the exterior. However, when it is most noticeable, it often looked at as apiece that degrade the overall appearance of the door and the front entrance of the house in general.

If the exterior of your home has the cohesive appeal, you will not have any issues of finding handle sets or door knobs that will compliment the unique look of your home. Even if you went for the eclectic stylish look, you are sure to find a wide selection of locks and handle sets that will blend in without any issues. There are many types of decorative locks in the market to accommodate a variety of styles.

Whether you are planning in renovating the exterior of your home, or just looking to add that missing touch, updating the lock system on the front door of your home can be an inexpensive great idea! Decorative handle sets and door knobs are what differentiate between simplicity and enhanced look. Here at Premier NorthWest Locksmith Spokane we carry decorative lock options from the leading lock manufacturers in the industry, so there won't be any compromise on security when adding style to your home!

Automotive Key Origination

See full list on Listly

About Pick Tools

Lock picks would normally come in a set of various tools as a mean to unlock a lock. There are many types of pick tool sets that are used by professional locksmith in order to accommodate most types of locks in the market. These types of tools would normally be used on tumbler or pin type cylinder locks where the tools will be used in order to lift the pins so the lock can be opened without using a key.

So when a lock would need to be picked? Many professional locksmiths in the industry are using pick tools to unlock a residential and sometimes commercial property lock applications where the customer needed a lockout service because he lost or misplaced the key. A locksmith technician would normally be able to use pick tools to unlock a lock without causing it any damage.

In addition to professional locksmith companies and technicians, there are many criminals who use the form of lock picking to break into homes. That is why, in many states around the country they have laws that restrict who can purchase a pick tool set and who can't. Technically in these legislated states, if you have evident or a proof for the need of a pick tool set, then you will be allowed to purchase one. On some of these states, the only people that would be allowed to own a pick tools sets are professional locksmiths and authorized law enforcement.

Commercial Exit Device Equipment Service

See full list on Listly

Cylinder Type Locks

In most homes around the country, you will find that their front door is equipped cylinder type lock-sets. A standard lock cylinder would normally contain pins that can be changed in order to match a particular key. Once the cylinder was matched to the new key using different sized pins inside it, the key will now operate the lock successfully.

There are several advantages to having a cylinder type lock. One of them as mentioned is the fact that they can be re-keyed to fit a different cut key. This can save money instead of changing the entire lock or lock-set, a professional locksmith can simply remove the cylinder from the lock and change the combination of the pins even without removing the entire lock. In addition, a cylinder can be easily reconfigured  in order to turn it into a wafer tumbler lock or a disc tumble lock for example.

A cylinder can be used to implement a type of high security system as well such as master-key. A master-key system will typically allow you to use the same type of key on all the locks in your home. A task in which a cylinder type lock will easily allow. In a cylinder type lock for that purpose, the mechanism can be removed and set-up to adapt a master-key type system. However, if needed, the locks can be configured to use different type of keys.

For additional security, a home owner has the option to choose between a single or double cylinder type locks. In a situation where a double cylinder lock is desired, a key would be needed from both sides of the lock in order to get it opened. This option is mostly popular in homes where there is an easy access to the front door where there are windows around it. That way, an intruder won't be able to reach in and unlock the door from the inside. However, in some places in the U.S., having a double cylinder type lock is not permitted due to safety reasons in case of an emergency.

With a long list of advantages for using a cylinder type lock in your home, there are some disadvantages as well. One of the main issue with a cylinder type lock is the fact that most types can easily be picked open. Intruders normally equipped with a pick tool set can easily use it in order to force the pins inside the cylinder to the open position. Another type of method many intruders like to use on cylinder type locks is a bump key. Although it have to be from the same name brand such as Schlage or Kwikset as the targeted lock to be used on, it is normally the quickest way to unlock a cylinder type lock.

For more information about cylinder type locks and higher security solutions, give us a call or visit Premier NorthWest Locksmith Spokane.

Lock Repair Service

See full list on Listly

Everest lock Fix

In the lock business, each manufacture would use its own design for a lock or cylinder. Although most types of residential locks would seem to be the same, the internal design would be different. For the average locksmith technician most types of residential locks are serviced in the same way regardless of the manufacturer, but it would mostly depend on the type of line. For a standard line of locks such as the type that could be found in an apartment complex property, the design would be very similar between a Schlage and a Kwikset type of lock. However, for the average locksmith technician, the problem in servicing a particular type of lock will begin when the lock is unique and uncommon which most likely will require a special care.

I got a call the other day from a customer who just came back to his home but was having trouble getting his key inside the lock in order to unlock the door. The customer seem pretty certain he was using the right key, so I figured that either the key was bad or the lock was badly contaminated. Either way, talking to the customer on the phone, it didn't seem it would be too difficult of an issue to resolve.

Once I got to the customer's home I wanted to see first what type of lock the customer had and looked like it was a Schlage Everest which was not very common and my first ever to work on. I then took a look at the key and it didn't seem to be worn out which made me believe the lock may be contaminated. After spraying some lock lubrication inside the lock, I made an attempt to insert the key inside the lock but still without any success.

I called a Spokane locksmith co-worker of mine to see if he had any info regarding that particular lock and according to him, it was a common issue. The key-way on these locks get easily damaged from inserting the key in the wrong way repeatedly. The solution was very simple. All I needed to do was take a proper Everest blank and use it like a "bump key" until it will reform the distorted area allowing the key to be inserted smoothly again.

Automotive Re-key Service

See full list on Listly

Schlage Double Cylinder Deadbolt

As a locksmith technician, I feel there is a big difference between servicing a residential type lock and a commercial type one. Usually, commercial grade locks will be much more heavy duty than residential type ones even though they may look similar at times. Most beginner locksmith technicians normally do not provide much services for commercial grade locks as these type require a little more skills, knowledge and special tools. However, sometimes, even the experienced locksmith technician will run into a particular commercial type lock that will puzzle him to find a solution.

I got a call recently from a local restaurant where the manager wanted to re-key all the locks in the restaurant to match one key. Normally, most restaurants are equipped with commercial grade standard locks and since I had enough experience servicing these types of locks, I didn't hesitate much to take the job. However, I did realize that it might be a few hours gig since the restaurant manager mentioned that there were about 6 doors with locks to re-key.

Once I got to the restaurant, the first thing I checked was the type of locks that doors had installed on. By what I've seen, all the door were equipped with a standard commercial grade Schlage lever handle and a deadbolt. I started taking apart all the locks to prepare them for a re-key. It took me few hours to complete the re-key and put all the locks back together, but when I was done, the manager said I forgot one door which was the door to his office.

The door to his office had a type of Schlage double cylinder deadbolt that I was not familiar with and probably was more high security than the other locks I re-keyed. When I asked why did he had a double cylinder deadbolt installed, he said that it was because of the safe in his office. As I examined the lock, I couldn't find any way that I could remove it in order to do a re-key on the cylinder.There was no retainer screw that I could find holding the cylinders together. I then called a Spokane locksmith co worker of mine to see if he had any experience with this type of lock before and luckily he did. Apparently, the inside cylinder had a plate over the retaining screws which explained why I could not locate them. All I needed to do was removing the plate to access the screws. Once I did that, it didn't take very long to finish re-keying that lock as well.

Commercial Lockout Services

See full list on Listly