Monday, November 21, 2016

Spokane Locksmith Door Lock Repair

Locksmith Spokane Door Lock
We all use doors and locks every single day. From so much use, the door locks become worn and faded. For such simple locking hardware, there is a lot that goes into the workings of a strong, secure entryway. Troubleshooting what the issue is when your door is not functioning properly becomes easy when there is more education on the subject rather than calling a locksmith in Spokane immediately.

An issue that you may find that you are having with the door lock is related to the fact that the door is sagging. This may cause the door strike to hit the strike plate too low or not allow it to spring into place altogether. Check the margins of the door. If the top of the door is closer to the jamb on the strike side of the door then the door is definitely sagging. A sagging door needs to be adjusted in order to function properly.

If it turns out that the strike is lined up correctly with the door, but it still won't keep the door closed then there is more troubleshooting that is needed to be performed. Depress the door strike inside and let it go. It should pop back out freely. If it sticks a bit, it means that it is necessary to lubricate it.

Conversely, if the latch pops back out freely; try putting extra pressure on the door when you close it. Does this action cause the strike to pop back into place when extra pressure is applied to the door? This determines that an adjustment to the strike plate will solve the issue. Adjusting a strike plate may need to be handled in a few different ways. Actions to try are tightening the door hinges and possible adding a support screw.

Spokane locksmith door lock strike plate
If your door does not stay closed it may indicate that the strike plate may need to be adjusted or otherwise the door strike is sticking and needs to be lubricated.

Lastly, the easiest problem to fix is when the door knob is hard to turn or is sticking. If the lock has a key, the key may be sticking or not working as well. By simply lubricating the lock set you will most likely be able take care of the problem. If you still experiencing issues, it would be recommended calling your local residential locksmith in Spokane.




No comments:

Post a Comment

Note: Only a member of this blog may post a comment.